SPEED SENSOR INSTALLATION

PROCEDURE


  1. INSTALL SPEED SENSOR NC

    A0057PK

    1. Coat a new O-ring with ATF WS.

    2. Install the O-ring to the sensor.

    3. Install the sensor with the bolt.

      Torque:
      8.8 N*m  { 90 kgf*cm, 78 in.*lbf }

    4. Connect the sensor connector.

  2. INSTALL SPEED SENSOR NT

    A0054DD

    1. Coat a new O-ring with ATF WS.

    2. Install the O-ring to the sensor.

    3. Install the sensor with the bolt.

      Torque:
      8.8 N*m  { 90 kgf*cm, 78 in.*lbf }

    4. Connect the sensor connector.

  3. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  4. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  5. INSTALL BATTERY CARRIER

    A00560W

    1. Install the battery carrier with the 4 bolts.

      Torque:
      19 N*m  { 194 kgf*cm, 14 ft.*lbf }

    2. Attach the 2 wire harness clamps.

  6. INSTALL BATTERY


    1. Install the battery tray.

    2. Install the battery.

    3. Install the battery clamp with the bolt and tighten the nut.

      Torque:
      for bolt
      17 N*m  { 168 kgf*cm, 12 ft.*lbf }
      for nut
      3.5 N*m  { 36 kgf*cm, 31 in.*lbf }

    4. Connect the cable to the positive (+) battery terminal.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. INSTALL NO. 2 CYLINDER HEAD COVER

    Click here

  9. INSTALL RADIATOR SUPPORT OPENING COVER

    Click here