TRANSMISSION WIRE INSTALLATION

PROCEDURE


  1. INSTALL TRANSMISSION WIRE

    A0052HJE02

    1. Coat a new O-ring with ATF WS and install it to the transmission wire connector.

    2. A0055LI

      Install the transmission wire with the bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    3. Connect the transmission wire connector.

  2. CONNECT TRANSMISSION WIRE

    A0058UKE03
    Text in Illustration
    *1 Lock Plate

    1. Coat the O-ring of the ATF temperature sensor with ATF WS.

    2. Install the ATF temperature sensor with the lock plate and bolt.

      Torque:
      6.6 N*m  { 67 kgf*cm, 58 in.*lbf }

    3. Connect the 5 shift solenoid valve connectors.

  3. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY

    A0057R6E08

    1. Install the 2 magnets to the oil pan.

      Text in Illustration
      *1 Magnet
    2. A0052PA

      Install a new gasket and the oil pan with the 18 bolts.

      Torque:
      7.8 N*m  { 80 kgf*cm, 69 in.*lbf }

  4. INSTALL NO. 1 ENGINE UNDER COVER

    Click here

  5. INSTALL FRONT LOWER BUMPER ABSORBER

    A0057NY

    1. Install the front lower bumper absorber with the 8 bolts and 3 screws.

    2. A0057MI

      Install the 2 screws and 4 bolts.

  6. INSTALL BATTERY CARRIER

    Click here

  7. INSTALL BATTERY

    Click here

  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  9. ADD AUTOMATIC TRANSAXLE FLUID

    Fluid type
    Toyota Genuine ATF WS

  10. INSPECT TRANSAXLE FLUID LEVEL

    Click here

  11. INSTALL RADIATOR SUPPORT OPENING COVER

    Click here