INSPECT SET SWITCH
Push the cruise control main switch on.
Drive the vehicle at a desired speed (between 40 km/h and 200 km/h [25 mph and 125 mph]).
Press the cruise control main switch to -SET.
| *1 | Cruise Control Indicator Light |
| *2 | Cruise Control SET Indicator Light |
Check that the cruise control SET indicator light illuminates at this time.
After releasing the switch, check that the vehicle cruises at the desired speed.
INSPECT "+" SWITCH
Push the cruise control main switch on.
Drive the vehicle at a desired speed (between 40 km/h and 200 km/h [25 mph and 125 mph]).
Press the cruise control main switch to -SET.
Check that the vehicle speed increases while the cruise control main switch is pushed to +RES, and that the vehicle cruises at the set speed when the cruise control main switch is released.
Momentarily press the cruise control main switch upward to +RES and immediately release it. Check that the vehicle speed increases by about 1.6 km/h (1 mph) (Tap-up function).
INSPECT "-" SWITCH
Push the cruise control main switch on.
Drive the vehicle at a desired speed (between 40 km/h and 200 km/h [25 mph and 125 mph]).
Press the cruise control main switch to -SET.
Check that the vehicle speed decreases while the cruise control main switch is pushed down to -SET, and that the vehicle cruises at the set speed when the cruise control main switch is released.
Momentarily press the cruise control main switch downward to -SET and immediately release it. Check that the vehicle speed decreases by about 1.6 km/h (1 mph) (Tap-down function).
INSPECT CANCEL FUNCTION (CANCEL SWITCH)
Push the cruise control main switch on.
Drive the vehicle at a desired speed (between 40 km/h and 200 km/h [25 mph and 125 mph]).
Press the cruise control main switch to -SET.
When performing one of the following, check that the cruise control system is canceled and that the normal driving mode is reset.
Depressing the brake pedal
Pushing the cruise control switch off
Pulling the cruise control switch to CANCEL
VSC operates while the vehicle is in motion
TRC operates for certain amount of time while driving with cruise control system controlling vehicle speed
TRC and VSC are off
for CVT:
Moving the shift lever to any position except D or M (6th, 5th or 4th gear)
w/ Shift Paddle Switch:
The transmission is changed from 4th gear to 3rd, 2nd or 1st gear with the transmission shift switch assembly while the shift lever is in D or M
for Manual Transaxle:
Depressing the clutch pedal
INSPECT RES (RESUME) SWITCH
Push the cruise control main switch on.
Drive the vehicle at a desired speed (between 40 km/h and 200 km/h [25 mph and 125 mph]).
Press the cruise control main switch to -SET.
Cancel the cruise control system by performing one of the following.
Depressing the brake pedal
Pulling the cruise control switch to CANCEL
VSC operates while the vehicle is in motion
TRC operates for certain amount of time while driving with cruise control system controlling vehicle speed
TRC and VSC are off
for CVT:
Moving the shift lever to any position except D or M (6th, 5th or 4th gear)
w/ Shift Paddle Switch:
The transmission is changed from 4th gear to 3rd, 2nd or 1st gear with the transmission shift switch assembly while the shift lever is in D or M
for Manual Transaxle:
Depressing the clutch pedal
After the cruise control main switch is pushed up to +RES at a driving speed of more than 40 km/h (25 mph), check that the vehicle restores the speed that was set before the cancellation.