IGNITION SWITCH INSTALLATION

PROCEDURE


  1. INSTALL IGNITION SWITCH ASSEMBLY (for CVT)


    1. A0057DN

      Install the ignition switch with the 2 screws.

    2. Attach the claw to connect the key interlock solenoid wire harness to the ignition switch.

  2. INSTALL IGNITION SWITCH ASSEMBLY (for Manual Transaxle)


    1. A0055DK

      Install the ignition switch with the 2 screws.

  3. INSTALL UPPER STEERING COLUMN WITH SWITCH BRACKET ASSEMBLY

    Click here

  4. INSTALL STEERING COLUMN ASSEMBLY


    1. for Power Tilt and Power Telescopic Steering Column:

      Install the steering column assembly (See page STEERING COLUMN > STEERING COLUMN ASSEMBLY (for Power Tilt and Power Telescopic Steering Column) > INSTALLATION).

    2. for Manual Tilt and Manual Telescopic Steering Column:

      Install the steering column assembly Click here.