IGNITION SWITCH INSTALLATION

PROCEDURE

1. INSTALL IGNITION SWITCH ASSEMBLY

   
   

   1. Install the ignition switch with the 2 screws.

   2. Attach the claw to connect the key interlock solenoid wire harness to the ignition switch.

2. INSTALL UPPER STEERING COLUMN WITH SWITCH BRACKET ASSEMBLY

   Click here

3. INSTALL STEERING COLUMN ASSEMBLY

   
   

   1. for Power Tilt and Power Telescopic Steering Column:

      Install the steering column assembly (See page STEERING COLUMN > STEERING COLUMN ASSEMBLY (for Power Tilt and Power Telescopic Steering Column) > INSTALLATION).

   2. for Manual Tilt and Manual Telescopic Steering Column:

      Install the steering column assembly Click here.