ВПУСКНОЙ КОЛЛЕКТОР СНЯТИЕ


  1. REMOVE INTAKE PIPE


    1. A01DQT4E01

      Loosen the hose clamp and remove the 2 bolts and intake pipe.

  2. REMOVE INTAKE FLANGE


    1. A01DQV6

      Remove the bolt and disconnect the PCV hose and heater hose bracket.

    2. A01DM8R

      Disconnect the manifold absolute pressure sensor connector.

    3. A01DM8Z

      Remove the 3 nuts, intake flange and gasket.

  3. REMOVE DIESEL THROTTLE BODY ASSEMBLY


    1. A01DS8W

      Disconnect the throttle open switch connector.

    2. Remove the 2 bolts and disconnect the wire harness bracket.

    3. A01DP55E02

      Disconnect the throttle control motor connector.

    4. Remove the diesel throttle body and gasket.

  4. REMOVE INJECTION PIPE


    1. A01DU7L

      Using a 17 mm union nut wrench, loosen the 8 union nuts of the 4 injection pipes.

    2. Remove the 2 nuts, 2 upper pipe clamps and 4 injection pipes together with the 2 lower pipe clamps.

  5. REMOVE INTAKE MANIFOLD


    1. A01DMRI

      Remove the bolt and disconnect the wire harness bracket.

    2. A01DOAR

      Remove the 6 bolts, 2 nuts, intake manifold and gasket.