МАСЛО ДЛЯ МЕХАНИЧЕСКОЙ ТРАНСМИССИИ ЗАМЕНА


  1. DRAIN MANUAL TRANSMISSION OIL


    1. A01DO2OE01

      Remove the drain plug and gasket, and then drain the manual transmission oil.

    2. A01DNHGE01

      Remove the filler plug and gasket.

    3. Install a new gasket and the drain plug.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

  2. ADD MANUAL TRANSMISSION OIL

  3. INSPECT MANUAL TRANSMISSION OIL


    1. Stop the vehicle on a level surface.

    2. A01DNZPE07

      Check that the oil level is between 0 and 5 mm (0 and 0.196 in.) from the bottom lip of the filler plug opening.

      Note


      • Problems may occur when the oil level is too high or low.

      • After replacing the oil, drive the vehicle and check the oil level again.

    3. Inspect for oil leaks when the oil level is low.

    4. A01DNHGE01

      Install a new gasket and the filler plug.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }