NAME PLATE INSTALLATION

Tech Tips

When installing the name plates or emblems, heat the vehicle body and name plates or emblems using a heat light.

Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Name Plate or Emblem 20 to 30°C (68 to 86°F)

Note

Do not heat the vehicle body, name plates or emblems excessively.


  1. INSTALL LUGGAGE COMPARTMENT DOOR EMBLEM


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Clean the luggage compartment door emblem. (If reusing the luggage compartment door emblem)


      1. Using a heat light, heat the luggage compartment door emblem.

      2. Remove the double-sided tape from the luggage compartment door emblem.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Apply new double-sided tape to the luggage compartment door emblem.

    3. Install the luggage compartment door emblem.


      1. Using a heat light, heat the vehicle body and luggage compartment door emblem.

      2. Remove the release paper from the luggage compartment door emblem.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. A01HVV5

        Engage the 2 pins and install the luggage compartment door emblem as shown in the illustration.

  2. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Clean the No. 2 luggage compartment door name plate. (If reusing the No. 2 luggage compartment door name plate)


      1. Using a heat light, heat the No. 2 luggage compartment door name plate.

      2. Remove the double-sided tape from the No. 2 luggage compartment door name plate.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Apply new double-sided tape to the No. 2 luggage compartment door name plate.

    3. Install the No. 2 luggage compartment door name plate.


      1. Using a heat light, heat the vehicle body and No. 2 luggage compartment door name plate.

      2. Remove the release paper from the No. 2 luggage compartment door name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 2 luggage compartment door name plate as shown in the illustration.

        A01HU97E02
        Text in Illustration
        *a Profile of Luggage Compartment Door Panel - -
        Reference Measurement
        Area Measurement Area Measurement
        A 51.7 mm (2.04 in.) B 223.0 mm (8.78 in.)
        C 52.9 mm (2.08 in.) - -

  3. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Clean the No. 3 luggage compartment door name plate. (If reusing the No. 3 luggage compartment door name plate)


      1. Using a heat light, heat the No. 3 luggage compartment door name plate.

      2. Remove the double-sided tape from the No. 3 luggage compartment door name plate.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Apply new double-sided tape to the No. 3 luggage compartment door name plate.

    3. Install the No. 3 luggage compartment door name plate.


      1. Using a heat light, heat the vehicle body and No. 3 luggage compartment door name plate.

      2. Remove the release paper from the No. 3 luggage compartment door name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 3 luggage compartment door name plate as shown in the illustration.

        A01HT0PE02
        Text in Illustration
        *a Profile of Luggage Compartment Door Panel - -
        Reference Measurement
        Area Measurement Area Measurement
        A 47.4 mm (1.87 in.) B 140.8 mm (5.54 in.)
        C 48.0 mm (1.89 in.) D 47.1 mm (1.85 in.)
        E 165.5 mm (6.52 in.) F 47.9 mm (1.89 in.)
        G 47.6 mm (1.87 in.) H 142.8 mm (5.62 in.)
        I 48.2 mm (1.90 in.) - -

  4. INSTALL NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Clean the No. 1 luggage compartment door name plate. (If reusing the No. 1 luggage compartment door name plate)


      1. Using a heat light, heat the No. 1 luggage compartment door name plate.

      2. Remove the double-sided tape from the No. 1 luggage compartment door name plate.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Apply new double-sided tape to the No. 1 luggage compartment door name plate.

    3. Install the No. 1 luggage compartment door name plate.


      1. Using a heat light, heat the vehicle body and No. 1 luggage compartment door name plate.

      2. Remove the release paper from the No. 1 luggage compartment door name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 1 luggage compartment door name plate as shown in the illustration.

        A01HSI0E02
        Text in Illustration
        *a Profile of Luggage Compartment Door Panel - -
        Reference Measurement
        Area Measurement Area Measurement
        A 155.9 mm (6.14 in.) B 203.6 mm (8.02 in.)
        C 155.9 mm (6.14 in.) - -

  5. INSTALL SIDE PANEL EMBLEM (for LH Side)


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Clean the side panel emblem. (If reusing the side panel emblem)


      1. Using a heat light, heat the side panel emblem.

      2. Remove the double-sided tape from the side panel emblem.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Apply new double-sided tape to the side panel emblem.

    3. Install the side panel emblem.


      1. Using a heat light, heat the vehicle body and side panel emblem.

      2. Remove the release paper from the side panel emblem.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the side panel emblem as shown in the illustration.

        A01HTYFE02
        Text in Illustration
        *a Profile of Fender Panel - -
        Reference Measurement
        Area Measurement Area Measurement
        A 163.0 mm (6.42 in.) B 241.1 mm (9.49 in.)
        C 152.4 mm (6.00 in.) - -

  6. INSTALL SIDE PANEL EMBLEM (for RH Side)


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Clean the side panel emblem. (If reusing the side panel emblem)


      1. Using a heat light, heat the side panel emblem.

      2. Remove the double-sided tape from the side panel emblem.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Apply new double-sided tape to the side panel emblem.

    3. Install the side panel emblem.


      1. Using a heat light, heat the vehicle body and side panel emblem.

      2. Remove the release paper from the side panel emblem.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the side panel emblem as shown in the illustration.

        A01HSVFE02
        Text in Illustration
        *a Profile of Fender Panel - -
        Reference Measurement
        Area Measurement Area Measurement
        A 152.4 mm (6.00 in.) B 240.9 mm (9.48 in.)
        C 163.0 mm (6.42 in.) - -