FRONT BUMPER INSTALLATION


  1. INSTALL FRONT BUMPER ASSEMBLY


    1. Move the front bumper assembly into position and install the 3 clips.

    2. Pull back the side of the front bumper assembly and connect each connector.

      Note

      Do not apply excessive force when pulling back the side of the front bumper assembly.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    3. A01HVKW

      Engage the 3 claws to install the front bumper assembly.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    4. Install the 6 screws.

    5. A01HV12E01
      Text in Illustration
      *1 Pin Hold Clip
      *a Correct
      *b Incorrect

      Install the pin hold clip as shown in the illustration.

      Note

      Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is aligned vertically.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. Install the clip.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  2. INSTALL RADIATOR GRILLE SUB-ASSEMBLY

    Click here

  3. ADJUST FOG LIGHT ASSEMBLY (w/ Fog Light)

    Click here