HAZARD WARNING SWITCH REMOVAL


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Click here.

  2. REMOVE LUGGAGE TRIM SERVICE HOLE COVER

    for Radio and Display Type with Intuitive Parking Assist System: Click here

    for Navigation Receiver Type: Click here

  3. DISCONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL (for Radio and Display Type with Intuitive Parking Assist System)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. DISCONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL (for Navigation Receiver Type)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. REMOVE REAR CONSOLE BOX ASSEMBLY

    Click here

  6. REMOVE BOX BOTTOM MAT


    1. A01HURY

      Remove the box bottom mat.

  7. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A01HV5K

      Remove the 2 screws <D> or <E>.

    2. A01HV6V

      Disengage the 4 clips and guide as shown in the illustration.

    3. Disconnect each connector to remove the upper console panel sub-assembly.

  8. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    1. A01HW8T

      Using a moulding remover, disengage the 2 claws and 2 clips as shown in the illustration.

    2. A01HSUT

      Using a moulding remover, disengage the 2 claws and 2 clips as shown in the illustration.

    3. A01HVNV

      Disengage the 3 claws and 2 clips as shown in the illustration.

    4. A01HSZ6

      Disengage the clamp.

    5. Disconnect the connector to remove the center instrument cluster finish panel assembly.

  9. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A01HTS7

      Pull the No. 2 instrument panel register assembly in the direction indicated by the arrow to disengage the 6 clips to remove the No. 2 instrument panel register assembly.

  10. REMOVE RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Radio and Display Type)


    1. A01HT4K

      Apply protective tape to the areas shown in the illustration.

      Text in Illustration
      A01HVUW Protective Tape
    2. A01HV38

      Remove the 4 bolts.

    3. A01HUHX

      Pull the radio receiver assembly with air conditioning control assembly toward the rear of the vehicle and disengage the 8 clips.

    4. Disconnect each connector and remove the radio receiver assembly with air conditioning control assembly.

  11. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Navigation Receiver Type)


    1. A01HTGG

      Apply protective tape to the areas shown in the illustration.

      Text in Illustration
      A01HVUW Protective Tape
    2. A01HU78

      Remove the 4 bolts.

    3. A01HV5C

      Pull the navigation receiver assembly with air conditioning control assembly toward the rear of the vehicle and disengage the 8 clips.

    4. Disconnect each connector and remove the navigation receiver assembly with air conditioning control assembly.

  12. REMOVE NO. 1 RADIO BRACKET (for Radio and Display Type)


    1. w/o Satellite Radio:


      1. A01HTU5

        Remove the 5 screws and No. 1 radio bracket.

    2. w/ Satellite Radio:


      1. A01HTMP

        Remove the 7 screws and No. 1 radio bracket.

  13. REMOVE NO. 2 RADIO BRACKET (for Radio and Display Type)


    1. w/o Satellite Radio:


      1. A01HVOP

        Remove the 5 screws and No. 2 radio bracket.

    2. w/ Satellite Radio:


      1. A01HW39

        Remove the 7 screws and No. 2 radio bracket.

  14. REMOVE NO. 1 RADIO BRACKET (for Navigation Receiver Type)


    1. w/o Satellite Radio:


      1. A01HSN0

        Remove the 5 screws and No. 1 radio bracket.

    2. w/ Satellite Radio:


      1. A01HSZA

        Remove the 7 screws and No. 1 radio bracket.

  15. REMOVE NO. 2 RADIO BRACKET (for Navigation Receiver Type)


    1. w/o Satellite Radio:


      1. A01HVDT

        Remove the 5 screws and No. 2 radio bracket.

    2. w/ Satellite Radio:


      1. A01HU7O

        Remove the 7 screws and No. 2 radio bracket.

  16. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (HAZARD SWITCH)


    1. A01HSYM

      Disengage the 4 clips and guide, and remove the air conditioning control assembly as shown in the illustration.