REAR COMBINATION LIGHT ASSEMBLY REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.


  1. REMOVE REAR BUMPER ASSEMBLY

    Click here

  2. REMOVE SPARE WHEEL COVER ASSEMBLY


    1. Remove the spare wheel cover assembly.

  3. REMOVE REAR FLOOR FINISH PLATE


    1. A01HUSM

      Remove the 5 clips.

    2. A01HU2Q

      Disengage the 4 clips and remove the rear floor finish plate.

  4. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


    1. A01HTPXE01
      Text in Illustration
      *1 Pin

      Push the pin and remove the No. 1 luggage compartment trim hook.

  5. REMOVE LUGGAGE COMPARTMENT FRONT TRIM COVER


    1. A01HSCM

      Disengage the 8 fasteners.

    2. Disengage the 3 claws and remove the luggage compartment front trim cover.

  6. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER


    1. A01HW3NE01
      Text in Illustration
      *1 Clip <A>
      *2 Clip <B>

      Remove the clip <A>.

    2. Remove the 2 clips <B>.

    3. Disengage the fastener and remove the luggage compartment inner trim cover LH.

  7. REMOVE REAR COMBINATION LIGHT ASSEMBLY


    1. A01HSDJ

      Disconnect each connector.

    2. Disengage the clamp.

    3. A01HUIQ

      Remove the 4 nuts and rear combination light assembly.