SIDE TURN SIGNAL LIGHT ASSEMBLY REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.


  1. REMOVE OUTER REAR VIEW MIRROR


    1. A01HT1RE01
      Text in Illustration
      *1 Protective Tape

      Apply protective tape to the areas shown in the illustration.

    2. Push the upper part of the mirror surface and tilt it.

    3. A01HSRPE01
      Text in Illustration
      *1 Moulding Remover

      Using a moulding remover, disengage the 2 claws at the lower part of the outer rear view mirror as shown in the illustration.

    4. A01HT5F

      Disengage the 2 guides as shown in the illustration.

    5. A01HW92

      Disconnect the 2 connectors and remove the outer rear view mirror.

  2. REMOVE OUTER MIRROR COVER


    1. A01HSXM

      Remove the 3 screws.

    2. A01HVUD

      Disengage the clamp.

    3. Disconnect the 2 connectors and remove the mirror actuator.

    4. A01HTKO

      Disengage the 7 claws and remove the outer mirror cover.

  3. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY


    1. A01HTPF

      Disengage the 2 claws.

    2. Disconnect the connector and remove the side turn signal light assembly.