OUTER REAR VIEW MIRROR COVER INSTALLATION

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure described below is for the LH side.


  1. INSTALL OUTER MIRROR COVER (w/o Retract Mirror)


    1. Engage the 8 claws to install the outer mirror cover.

  2. INSTALL OUTER MIRROR COVER (w/ Retract Mirror)


    1. Engage the 7 claws to install the outer mirror cover.

    2. Connect the 2 connectors.

    3. Engage the clamp.

    4. Install the mirror actuator with the 3 screws.

      Torque:
      1.1 N*m  { 11 kgf*cm, 10 in.*lbf }

  3. INSTALL OUTER REAR VIEW MIRROR (w/o Retract Mirror)


    1. w/ Mirror Heater:


      1. Connect the 2 connectors.

    2. w/ Mirror Heater and Blind Spot Monitor System:


      1. Connect the 3 connectors.

      2. Engage the 2 claws.

    3. A01HVOE

      Engage the 2 guides on the lower part of the outer mirror to the outer rear view mirror.

    4. A01HU1L

      Engage the 2 claws on the upper part of the outer mirror to the outer rear view mirror.

  4. INSTALL OUTER REAR VIEW MIRROR (w/ Retract Mirror)


    1. Connect the 2 connectors.

    2. A01HUIV

      Engage the 2 guides on the upper part of the outer mirror to the outer rear view mirror.

    3. A01HT34

      Engage the 2 claws on the lower part of the outer mirror to the outer rear view mirror.