LUGGAGE DOOR HINGE TORSION BAR REMOVAL

Note

After installing the torsion bar, use your hand to open and close the luggage door. Make sure the luggage door can open and close smoothly.


  1. REMOVE SPARE WHEEL COVER ASSEMBLY


    1. Remove the spare wheel cover assembly.

  2. REMOVE BAGGAGE HOLDER NET (w/ Partition Net)


    1. Remove the baggage holder net.

  3. REMOVE REAR FLOOR FINISH PLATE


    1. A01HUSM

      Remove the 5 clips.

    2. A01HU2Q

      Disengage the 4 clips and remove the rear floor finish plate.

  4. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


    1. A01HV3FE01
      Text in Illustration
      *1 Pin

      Push the 2 pins and remove the 2 No. 1 luggage compartment trim hooks.

  5. REMOVE LUGGAGE COMPARTMENT FRONT TRIM COVER


    1. A01HSCM

      Disengage the 8 fasteners.

    2. Disengage the 3 claws and remove the luggage compartment front trim cover.

  6. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER LH


    1. A01HW3NE01
      Text in Illustration
      *1 Clip <A>
      *2 Clip <B>

      Remove the clip <A>.

    2. Remove the 2 clips <B>.

    3. Disengage the fastener and remove the luggage compartment inner trim cover LH.

  7. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER RH


    1. A01HUJME01
      Text in Illustration
      *1 Clip <A>
      *2 Clip <B>

      Remove the clip <A>.

    2. Remove the 2 clips <B>.

    3. Disengage the fastener and remove the luggage compartment inner trim cover RH.

  8. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER LH


    1. A01HSH3

      Disengage the 4 claws and remove the luggage compartment door hinge cover LH.

  9. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  10. REMOVE LUGGAGE DOOR HINGE TORSION BAR LH


    1. A01HVE8E01

      Disengage the hook in the order indicated in the illustration and disconnect the rear seatback lock assembly RH (rear seat lock control cable RH).

    2. A01HU8VE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the luggage door hinge.

    3. A01HV96E01

      Using SST, disconnect the luggage door hinge torsion bar LH from the luggage door hinge and the left side of the vehicle body as shown in the illustration.

      SST
      09804-24010
    4. A01HSSP

      Disengage the 2 claws as shown in the illustration.

    5. A01HSZK

      Disconnect the luggage door hinge torsion bar LH from the luggage compartment door torsion bar support as shown in the illustration.

    6. A01HVGH

      Remove the luggage door hinge torsion bar LH from the right side of the vehicle body as shown in the illustration.

  11. REMOVE LUGGAGE DOOR HINGE TORSION BAR RH


    1. A01HVPKE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the luggage door hinge.

    2. A01HVPEE01

      Using SST, disconnect the luggage door hinge torsion bar RH from the luggage door hinge and the right side of the vehicle body as shown in the illustration.

      SST
      09804-24010
    3. A01HVZH

      Disconnect the luggage door hinge torsion bar RH from the luggage compartment door torsion bar support as shown in the illustration.

    4. A01HW2L

      Remove the luggage door hinge torsion bar RH from the left side of the vehicle body as shown in the illustration.

  12. REMOVE LUGGAGE COMPARTMENT DOOR TORSION BAR SUPPORT


    1. A01HSLP

      Remove the luggage compartment door torsion bar support as shown in the illustration.

      Note

      Make sure to replace the luggage compartment door torsion bar support with a new one.