LUGGAGE COMPARTMENT DOOR ADJUSTMENT

A01HV6UE01
Text in Illustration
*1 Centering Bolt
*2 Standard Bolt

Tech Tips


  • Centering bolts are used to mount the door hinge to the door. The door cannot be adjusted with the centering bolts installed. Substitute the centering bolts with standard bolts when making adjustments.

  • Specified torque for standard bolts is shown in the standard bolt chart Click here.


  1. REMOVE LUGGAGE COMPARTMENT DOOR COVER


    1. A01HVNE

      Remove the 13 clips and luggage compartment door cover.

  2. REMOVE SPARE WHEEL COVER ASSEMBLY


    1. Remove the spare wheel cover assembly.

  3. REMOVE REAR FLOOR FINISH PLATE


    1. A01HUSM

      Remove the 5 clips.

    2. A01HU2Q

      Disengage the 4 clips and remove the rear floor finish plate.

  4. ADJUST LUGGAGE COMPARTMENT DOOR


    1. A01HSZP

      Loosen the door side hinge bolts to adjust the door horizontally and vertically.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }
    2. A01HVCI

      Using a T40 "TORX" socket wrench, slightly loosen the striker mounting screws.

    3. Using a brass bar and a hammer, hit the striker to adjust its position.

    4. Using a T40 "TORX" socket wrench, tighten the striker mounting screws after adjustment.

      Torque:
      23 N*m  { 235 kgf*cm, 17 ft.*lbf }

  5. INSTALL REAR FLOOR FINISH PLATE


    1. A01HTNS

      Engage the 4 clips and install the rear floor finish plate.

    2. Install the 5 clips.

  6. INSTALL SPARE WHEEL COVER ASSEMBLY


    1. Install the spare wheel cover assembly.

  7. INSTALL LUGGAGE COMPARTMENT DOOR COVER


    1. A01HVNE

      Install the luggage compartment door cover with the 13 clips.

  8. INSPECT LUGGAGE COMPARTMENT DOOR


    1. Check that the clearance measurements of areas a through d are within each standard range.

      A01HVRUE01
      Standard Clearance
      Area Measurement Area Measurement
      a 6.4 mm (0.252 in.) b 2.0 to 5.0 mm (0.0787 to 0.197 in.)
      c -1.0 to 2.0 mm (-0.0394 to 0.0787 in.) d 3.85 to 7.85 mm (0.152 to 0.309 in.)