HOOD ON-VEHICLE INSPECTION


  1. INSPECT HOOD SUB-ASSEMBLY


    1. Check that the clearance measurements of areas a through d are within each standard range.

      A01HUYZE01
      Standard Clearance
      Area Measurement Area Measurement
      a 2.45 to 6.45 mm (0.0965 to 0.254 in.) b 3.55 to 7.55 mm (0.140 to 0.297 in.)
      c 2.0 to 5.0 mm (0.0787 to 0.197 in.) d -1.5 to 1.5 mm (-0.0591 to 0.0591 in.)