POWER WINDOW CONTROL SYSTEM FAIL-SAFE CHART


  1. POWER WINDOW OPERATION IN FAIL-SAFE MODE


    1. The power window control system prohibits the following power window operations when the pulse sensor for the jam protection function has problems and the window position or the learned value is abnormal.

      Tech Tips

      If the pulse sensor built into the power window regulator motor malfunctions, the power window control system enters fail-safe mode.

      Power Window Regulator Master Switch Assembly
      Power Window Operation Condition
      Power switch on (IG)

      Power switch off

      (Key-off operation permitted)

      Power switch off

      (Key-off operation prohibited)
      Manual up (Driver door window) X X -
      Manual down (Driver door window) ○ X -

      Auto up (Driver door window)

      (hold switch at auto up position)

      		 ○* X -
      Auto up (Driver door window) X X -
      Auto down (Driver door window) X X -

      Tech Tips


      • ○: Operates

      • X: Operation prohibited

      • *: Operates in manual mode without jam protection

      Key-linked and Wireless Transmitter-linked Operation*
      Power Window Operation Condition
      Power switch on (IG)

      Power switch off

      (Key-off operation permitted)

      Power switch off

      (Key-off operation prohibited)
      Key-linked open and close* - X X
      Wireless transmitter-linked open* - X X

      • *: This function is set through the customize function, as it is off by default.

      Tech Tips

      X: Operation prohibited


      1. Power window regulator master switch LED control

        Tech Tips

        During normal operation (fail-safe is not operating), or during fail-safe mode when there is a pulse sensor malfunction or the window position or learned value is abnormal, the LED illuminates as shown in the illustration.


        1. For driver door:

          A01HTOEE10

      2. Fail-safe deactivation condition


        • When the pulse sensor is normal, to deactivate fail-safe mode, pull up the power window switch to the auto up position and hold it for at least 1 second to fully close the window from the fully open position. As a result, the auto up/down function will return.

    2. Initialization failure

      Tech Tips

      During initialization of the power window regulator motor ECU, when the window position or initialization complete status cannot be properly read from the EEPROM, the power window control system prohibits operation as follows:

      Power Window Regulator Master Switch Assembly
      Power Window Operation Condition
      Power switch on (IG)

      Power switch off

      (Key-off operation permitted)

      Power switch off

      (Key-off operation prohibited)
      Manual up (Driver door window) X X -
      Manual down (Driver door window) ○ X -

      Auto up (Driver door window)

      (hold switch at auto up position)

      		 ○* X -
      Auto up (Driver door window) X X -
      Auto down (Driver door window) X X -

      Tech Tips


      • ○: Operates

      • X: Operation prohibited

      • *: Operates in manual mode without jam protection

      Key-linked and Wireless Transmitter-linked Operation*
      Power Window Operation Condition
      Power switch on (IG)

      Power switch off

      (Key-off operation permitted)

      Power switch off

      (Key-off operation prohibited)
      Key-linked open and close* - X X
      Wireless transmitter-linked open* - X X

      • *: This function is set through the customize function, as it is off by default.

      Tech Tips

      X: Operation prohibited


      1. Power window regulator master switch LED control

        Tech Tips

        During initialization of the power window regulator motor ECU, when the window position or initialization complete status cannot be properly read from the EEPROM during fail-safe mode, the LED illuminates as shown in the illustration.


        1. For driver door:

          A01HVO4E08

    3. LIN communication failure

      Tech Tips

      If the LIN communication line malfunctions (communication stop), the power window control system prohibits operation as follows:

      Power Window Regulator Master Switch Assembly
      Power Window Operation Condition
      Power switch on (IG)
      Manual up ○*
      Manual down ○
      Auto up (hold switch at auto up position) -
      Auto up -
      Auto down -

      Tech Tips


      • ○: Operates

      • *: Jam protection can operate.

    4. LIN communication failure and pulse sensor failure

      Tech Tips

      If the LIN communication line malfunctions (communication stop) and the pulse sensor for the jam protection function has problems, the power window control system prohibits operation as follows:

      Power Window Regulator Master Switch Assembly
      Power Window Operation Condition
      Always
      Manual up X
      Manual down X
      Auto up (hold switch at auto up position) X
      Auto up X
      Auto down X

      Tech Tips


      • X: Operation prohibited

      • When the jam protection function does not operate due to the LIN communication failure, the manual up and auto up functions will not operate.

    5. LIN communication failure and abnormal window position learned value or initialization failure

      Tech Tips

      If the LIN communication line malfunctions (communication stop) and the window position or the learned value is abnormal, the power window control system prohibits operation as follows:

      Power Window Regulator Master Switch Assembly
      Power Window Operation Condition
      Always
      Manual up ○*
      Manual down ○
      Auto up (hold switch at auto up position) -
      Auto up -
      Auto down -

      Tech Tips


      • ○: Operates

      • *: Jam protection can operate and window reverses upon reaching the fully closed position.