REAR POWER OUTLET SOCKET REMOVAL


  1. REMOVE FRONT PANEL GARNISH LH


    1. A01HU0I

      Disengage the 3 claws, 2 clips and 8 guides to remove the front panel garnish LH.

  2. REMOVE FRONT PANEL GARNISH RH


    1. A01HUKI

      Disengage the 3 claws, 2 clips and 8 guides to remove the front panel garnish RH.

  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01HTOR

      Turn the shift lever knob sub-assembly counterclockwise and remove the shift lever knob sub-assembly.

  4. REMOVE REAR CONSOLE UPPER PANEL SUB-ASSEMBLY


    1. Open the upper console panel sub-assembly door.

    2. Move the shift lever to N.

    3. A01HSJ6

      Disengage the 4 clips.

    4. Disconnect each connector and remove the rear console upper panel sub-assembly.

  5. REMOVE UPPER CONSOLE BOX SUB-ASSEMBLY


    1. A01HTJS

      Remove the 2 screws.

    2. A01HVCC

      Disengage the 4 clips and 2 guides remove the upper console box sub-assembly as shown in the illustration.

    3. A01HVHX

      Disengage the clamp.

    4. Disconnect the connector to remove the upper console box sub-assembly.

  6. REMOVE NO. 3 POWER OUTLET SOCKET ASSEMBLY


    1. A01HT3M

      Turn the No. 3 power outlet socket assembly in the direction shown in the illustration to disengage the claw.

    2. A01HTMX

      Using a screwdriver, disengage the claw, and then push in the No. 3 power outlet socket assembly until the protrusion of the No. 3 power outlet socket assembly comes into contact with the No. 2 power outlet socket cover.

    3. A01HUY9

      As shown in the illustration, align the protrusion of the No. 3 power outlet socket assembly and the notch of the No. 2 power outlet socket cover.

    4. A01HUT2

      Using a screwdriver, disengage the claw and remove the No. 3 power outlet socket assembly from the No. 2 power outlet socket cover.

  7. REMOVE NO. 2 POWER OUTLET SOCKET COVER


    1. A01HUWM

      Disengage the 2 claws and remove the No. 2 power outlet socket cover.