POWER WINDOW CONTROL SYSTEM Driver Side Door Power Window does not Operate with Driver Side Door Key Cylinder or Wireless Transmitter
DESCRIPTION
-
When a key switch is pushed: 1) the door control receiver receives the wireless door lock signal; 2) the door control receiver sends a signal to the main body ECU (multiplex network body ECU) through the certification ECU (smart key ECU assembly); 3) the main body ECU (multiplex network body ECU) sends the operation permission signal to the power window regulator motor assembly LH (for driver door); and 4) the power window regulator motor assembly LH (for driver door) is activated.
Wireless Transmitter-linked Function
-
When the driver door key cylinder (key linked switch) is turned: 1) the door lock motor receives the signal; 2) the main body ECU (multiplex network body ECU) sends the signal to the power window regulator motor assembly LH (for driver door); and 3) the power window regulator motor assembly LH (for driver door) is activated.
Key-linked Function
INSPECTION PROCEDURE
Note
-
This function is set through the customize function, as it is off by default.
-
The power window control system uses the LIN communication system and CAN communication system. Inspect the communication function by following How to Proceed with Troubleshooting Click here. Troubleshoot the power window control system after confirming that the communication system is functioning properly.
PROCEDURE
-
CHECK BASIC FUNCTION (WIRELESS AND POWER DOOR LOCK CONTROL SYSTEM)
-
Check that the wireless door lock/unlock function operates normally Click here.
-
Check that the key-linked lock/unlock function operates normally Click here .
Result Result Proceed to Wireless door lock/unlock function and key-linked lock/unlock function operate normally A Wireless door lock/unlock function does not operate normally B Key-linked lock/unlock function does not operate normally C
B 
GO TO WIRELESS DOOR LOCK CONTROL SYSTEM (Proceed to Problem Symptoms Table) Click here
C
GO TO POWER DOOR LOCK CONTROL SYSTEM (Proceed to Problem Symptoms Table) Click here
A 
-
-
CHECK MANUAL UP / DOWN FUNCTION
-
Check that the manual up and down functions using the power window regulator master switch assembly can operate the driver door power window Click here.
OK Manual up and down functions are normal.
NG
GO TO OTHER PROBLEM (Proceed to Problem Symptoms Table) Click here
OK 
REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) Click here
-