CONDENSER REASSEMBLY


  1. INSTALL COOLER DRYER


    1. A01HW4E

      Using pliers, install a new cooler dryer to the modulator.

    2. A01HU01

      Apply a sufficient amount of compressor oil to a new O-ring and the fitting surfaces of the cap.

      Compressor oil
      ND-OIL 11 or equivalent
    3. A01HV00E01
      Text in Illustration
      *1 14 mm Straight Hexagon Wrench

      Using a 14 mm straight hexagon wrench, install the cap to the modulator.

      Torque:
      2.9 N*m  { 30 kgf*cm, 26 in.*lbf }

      Note


      • Keep the O-ring and O-ring fitting surfaces free from dirt or foreign matter.

      • Do not use any compressor oil other than ND-OIL 11 or equivalent.