FRONT SEAT CUSHION HEATER INSTALLATION


  1. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY


    1. Using a tacker, install the front seat cushion heater assembly to the separate type front seat cushion cover with 20 new tag pins.

  2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A01HTYI

      Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 12 new hog rings.

      Note


      • Be careful not to damage the separate type front seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

  3. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. Temporarily install the separate type front seat cushion cover with pad.

    2. Engage each hook.

    3. for Driver Side:


      1. A01HUV4

        Install the separate type front seat cushion cover.

    4. for Front Passenger Side:


      1. A01HV36

        Install the separate type front seat cushion cover.

    5. A01HV9UE01

      Engage the claw (D) and 3 clamps (C) to install the front seat airbag assembly wire harness.

    6. Engage the clamp (B).

    7. Connect the connector (A).

    8. w/ Seat Heater System:


      1. Connect the connector (E).

      2. Engage the clamp (F).

  4. INSTALL FRONT SEAT INNER CUSHION SHIELD


    1. Install the front seat inner cushion shield with the 2 screws.

      Torque:
      0.6 N*m  { 6 kgf*cm, 5 in.*lbf }

  5. INSTALL FRONT POWER SEAT SWITCH

    Click here