LUMBAR SUPPORT ADJUSTER ASSEMBLY (for Power Seat) REMOVAL


  1. REMOVE FRONT SEAT ASSEMBLY LH

    Click here

  2. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. A01HU7H

      Disconnect the 2 rubber bands of the separate type front seatback cover.

  3. DISCONNECT CONNECTORS


    1. A01HV9UE01

      Disconnect the connector (A).

    2. Disengage the clamp (B).

    3. Disengage the claw (D) and 3 clamps (C) to separate the front seat airbag assembly wire harness.

    4. Disconnect the connector (E).

    5. Disengage the clamp (F).

  4. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. A01HUMR

      Disengage the hook.

    2. A01HSHI

      Disengage the 2 fasteners.

    3. A01HSCS

      Turn back the separate type front seatback cover.

    4. A01HUTF

      Disengage the 2 hooks.


      1. Remove the 4 clips.

      2. Slide each hook to disengage them.

    5. A01HSU5

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    6. A01HUL9

      Remove the separate type front seatback cover with pad.

  5. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY


    1. A01HSG0

      Disconnect the connector.

    2. Disengage the 4 claws.

    3. Disengage the 2 guides to remove the lumbar support adjuster assembly.

    4. Remove the 2 front seatback hooks from the lumbar support adjuster assembly.