FRONT SEAT ASSEMBLY (for Manual Seat) DISASSEMBLY


  1. REMOVE SEAT ADJUSTER COVER CAP


    1. A01HTY6

      Remove the 2 seat adjuster cover caps.

  2. REMOVE RECLINING ADJUSTER RELEASE HANDLE


    1. A01HVBYE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the reclining adjuster release handle.

  3. REMOVE VERTICAL ADJUSTING HANDLE (for Driver Side)


    1. A01HSJW

      Remove the screw and vertical adjusting handle.

  4. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. A01HVV3

      Disconnect the 2 rubber bands of the separate type front seatback cover.

  5. REMOVE FRONT SEAT CUSHION SHIELD


    1. A01HUS2

      Remove the 2 screws.

    2. Disengage the 2 claws to remove the front seat cushion shield.

  6. REMOVE FRONT SEAT INNER CUSHION SHIELD


    1. A01HVTM

      Remove the 2 screws and front seat inner cushion shield.

  7. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)


    1. Disengage each clamp under the front seat assembly.

    2. A01HT5P

      Disengage the clamp.

    3. Remove the nut and front seat inner belt assembly LH.

  8. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)


    1. A01HU1YE01
      Text in Illustration
      *1 Limit Switch

      Disconnect the connector.

    2. Remove the screw and disconnect the limit switch.

    3. Remove the nut and front seat inner belt assembly RH.

  9. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. A01HTJT

      Disengage the claw and 3 clamps to separate the front seat airbag assembly wire harness.

    2. for Driver Side:


      1. A01HTAT

        Separate the separate type front seat cushion cover.

    3. for Front Passenger Side:


      1. A01HVRN

        Separate the separate type front seat cushion cover.

    4. A01HUIN

      Disengage each hook and remove the separate type front seat cushion cover with pad.

  10. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A01HSHS

      Remove the 12 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.

  11. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. A01HU81

      Disengage the hook.

    2. A01HVA8

      Disengage the 2 fasteners.

    3. A01HTUO

      Turn back the separate type front seatback cover.

    4. A01HUTF

      Disengage the 2 hooks.


      1. Remove the 4 clips.

      2. Slide each hook to disengage them.

    5. A01HSU5

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    6. A01HSKM

      Remove the separate type front seatback cover with pad.

  12. REMOVE FRONT SEAT AIRBAG ASSEMBLY


    1. A01HUF2

      Disengage the 2 clamps.

    2. Remove the 2 nuts and the front seat airbag assembly.

      CAUTION:


      • The nuts must not be reused.

      • Make sure that the front seatback frame sub-assembly or separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.

  13. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. A01HTBB

      Remove the 2 hog rings.

    2. Disengage the 2 fasteners to remove the separate type front seatback cover from the separate type front seatback pad.

  14. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side)


    1. A01HUVX

      Remove the screw.

    2. Disengage the hook as shown in the illustration.

    3. Disengage the 2 claws to remove the front seat lower cushion shield LH.

  15. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (for Driver Side)


    1. A01HW6V

      Remove the screw.

    2. Disengage the hook as shown in the illustration.

    3. Disengage the 2 claws to remove the front seat lower cushion shield RH.

  16. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for Front Passenger Side)


    1. A01HSAI

      Disengage the 2 claws to remove the front seat lower cushion shield LH.

  17. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (for Front Passenger Side)


    1. A01HVIM

      Disengage the 2 claws to remove the front seat lower cushion shield RH.

  18. REMOVE FRONT UPPER SEAT TRACK COVER LH


    1. A01HVC0

      Disengage the 2 claws to remove the front upper seat track cover LH.

  19. REMOVE FRONT UPPER SEAT TRACK COVER RH


    1. A01HT7X

      Disengage the 2 claws to remove the front upper seat track cover RH.

  20. REMOVE REAR UPPER SEAT TRACK COVER LH (for Front Passenger Side)


    1. A01HSCT

      Disengage the 2 claws to remove the rear upper seat track cover LH.

  21. REMOVE REAR UPPER SEAT TRACK COVER RH (for Front Passenger Side)


    1. A01HTX8

      Disengage the 2 claws to remove the rear upper seat track cover RH.

  22. REMOVE OCCUPANT DETECTION ECU (for Front Passenger Side)


    1. A01HUGHE01
      Text in Illustration
      *1 Protective Tape

      Disconnect the 2 connectors.

    2. Using a screwdriver with the tip wrapped with protective tape, disengage the claw and remove the occupant detection ECU.

  23. REMOVE FRONT SEAT WIRE RH (for Front Passenger Side)


    1. Disconnect each connector and disengage each wire harness clamp to remove the front seat wire RH.

  24. REMOVE RECLINING CONTROL LEVER


    1. A01HW00

      Remove the bolt and reclining control lever.

  25. REMOVE FRONT SEAT CUSHION PANEL SUB-ASSEMBLY (for Driver Side)


    1. A01HVYM

      Remove the 4 bolts and front seat cushion panel sub-assembly.

  26. REMOVE FRONT SEATBACK FRAME SUB-ASSEMBLY


    1. A01HVPI

      Remove the 4 bolts and the front seatback frame sub-assembly.

  27. REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY


    1. A01HVVM

      Disengage the 4 claws.

    2. Disengage the 2 guides to remove the separate type front seatback spring assembly.

    3. Remove the 2 front seatback hooks from the separate type front seatback spring assembly.

  28. REMOVE SEPARATE TYPE FRONT SEAT CUSHION SPRING ASSEMBLY


    1. A01HW47

      Remove the separate type front seat cushion spring assembly.