FRONT SEAT ASSEMBLY (for Power Seat) DISASSEMBLY


  1. REMOVE SEAT ADJUSTER COVER CAP


    1. A01HTKI

      Remove the 2 seat adjuster cover caps.

  2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. A01HUI0

      Using a moulding remover, disengage the 4 claws to remove the slide and vertical power seat switch knob.

  3. REMOVE RECLINING POWER SEAT SWITCH KNOB


    1. A01HV2S

      Using a moulding remover, disengage the 4 claws to remove the reclining power seat switch knob.

  4. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. A01HU7H

      Disconnect the 2 rubber bands of the separate type front seatback cover.

  5. REMOVE FRONT SEAT CUSHION SHIELD


    1. A01HUX6

      Remove the screw.

    2. Disengage the 2 claws to remove the front seat cushion shield.

    3. A01HU3I

      Disengage the wire harness clamp.

    4. Disconnect the front power seat switch connector.

    5. for Driver Side:


      1. A01HSKS

        Disengage 4 claws to remove the front lumbar power seat switch from the front seat cushion shield.

  6. REMOVE FRONT POWER SEAT SWITCH


    1. A01HSHL

      Remove the 3 screws and front power seat switch from the front seat cushion shield.

  7. REMOVE FRONT LUMBAR POWER SEAT SWITCH (for Driver Side)


    1. A01HVX1

      Disconnect the connector to remove the front lumbar power seat switch.

  8. REMOVE FRONT SEAT INNER CUSHION SHIELD


    1. A01HSWF

      Remove the 2 screws and front seat inner cushion shield.

  9. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)


    1. Disengage each clamp under the front seat assembly.

    2. A01HT5P

      Disengage the clamp.

    3. Remove the nut and front seat inner belt assembly LH.

  10. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)


    1. A01HU1YE01
      Text in Illustration
      *1 Limit Switch

      Disconnect the connector.

    2. Remove the screw and disconnect the limit switch.

    3. Remove the nut and front seat inner belt assembly RH.

  11. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. A01HV9UE01

      Disconnect the connector (A).

    2. Disengage the clamp (B).

    3. Disengage the claw (D) and 3 clamps (C) to separate the front seat airbag assembly wire harness.

    4. w/ Seat Heater System:


      1. Disconnect the connector (E).

      2. Disengage the clamp (F).

    5. for Driver Side:


      1. A01HUV4

        Separate the separate type front seat cushion cover.

    6. for Front Passenger Side:


      1. A01HV36

        Separate the separate type front seat cushion cover.

    7. A01HTLU

      Disengage the 4 hooks.

    8. A01HVMD

      Disengage each hook and remove the separate type front seat cushion cover with pad.

  12. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A01HSHS

      Remove the 12 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.

  13. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System)


    1. A01HSU2

      Remove the 20 tag pins and the front seat cushion heater assembly from the separate type front seat cushion cover.

  14. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. A01HUMR

      Disengage the hook.

    2. A01HSHI

      Disengage the 2 fasteners.

    3. A01HSCS

      Turn back the separate type front seatback cover.

    4. A01HUTF

      Disengage the 2 hooks.


      1. Remove the 4 clips.

      2. Slide each hook to disengage them.

    5. A01HSU5

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    6. A01HUL9

      Remove the separate type front seatback cover with pad.

  15. REMOVE FRONT SEAT AIRBAG ASSEMBLY


    1. A01HUF2

      Disengage the 2 clamps.

    2. Remove the 2 nuts and the front seat airbag assembly.

      CAUTION:


      • The nuts must not be reused.

      • Make sure that the front seatback frame sub-assembly or separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.

  16. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. A01HTBB

      Remove the 2 hog rings.

    2. Disengage the 2 fasteners to remove the separate type front seatback cover from the separate type front seatback pad.

  17. REMOVE FRONT SEATBACK HEATER ASSEMBLY (w/ Seat Heater System)


    1. A01HV8K

      Remove the 8 tag pins and the front seatback heater assembly from the separate type front seatback cover.

  18. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side)


    1. A01HVDZ

      Remove the screw.

    2. Disengage the hook as shown in the illustration.

    3. Disengage the 2 claws to remove the front seat lower cushion shield LH.

  19. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (for Driver Side)


    1. A01HVCZ

      Remove the screw.

    2. Disengage the hook as shown in the illustration.

    3. Disengage the 2 claws to remove the front seat lower cushion shield RH.

  20. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for Front Passenger Side)


    1. A01HV2R

      Disengage the 2 claws to remove the front seat lower cushion shield LH.

  21. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (for Front Passenger Side)


    1. A01HU8C

      Disengage the 2 claws to remove the front seat lower cushion shield RH.

  22. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System)


    1. A01HSMJ

      Disconnect the connector.

    2. Disengage the clamp and remove the seat heater control sub-assembly.

  23. REMOVE OCCUPANT DETECTION ECU (for Front Passenger Side)


    1. A01HUGHE01
      Text in Illustration
      *1 Protective Tape

      Disconnect the 2 connectors.

    2. Using a screwdriver with the tip wrapped with protective tape, disengage the claw and remove the occupant detection ECU.

  24. REMOVE FRONT SEAT WIRE


    1. Disconnect each connector and disengage each wire harness clamp to remove the front seat wire.

  25. REMOVE FRONT NO. 2 SEAT WIRE


    1. Disconnect each connector and disengage each wire harness clamp to remove the front No. 2 seat wire.

  26. REMOVE FRONT UPPER SEAT TRACK COVER LH


    1. A01HTUM

      Disengage the 2 claws to remove the front upper seat track cover LH.

  27. REMOVE FRONT UPPER SEAT TRACK COVER RH


    1. A01HTGU

      Disengage the 2 claws to remove the front upper seat track cover RH.

  28. REMOVE REAR UPPER SEAT TRACK COVER LH (for Front Passenger Side)


    1. A01HSX8

      Disengage the 2 claws to remove the rear upper seat track cover LH.

  29. REMOVE REAR UPPER SEAT TRACK COVER RH (for Front Passenger Side)


    1. A01HUB0

      Disengage the 2 claws to remove the rear upper seat track cover RH.

  30. REMOVE FRONT SEAT CUSHION PANEL SUB-ASSEMBLY (for Driver Side)


    1. A01HUOV

      Remove the 4 bolts and front seat cushion panel sub-assembly.

  31. REMOVE FRONT SEATBACK FRAME SUB-ASSEMBLY


    1. A01HTNR

      Remove the 4 bolts and the front seatback frame sub-assembly.

  32. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY (for Driver Side)


    1. A01HSG0

      Disconnect the connector.

    2. Disengage the 4 claws.

    3. Disengage the 2 guides to remove the lumbar support adjuster assembly.

    4. Remove the 2 front seatback hooks from the lumbar support adjuster assembly.

  33. REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY (for Front Passenger Side)


    1. A01HVVM

      Disengage the 4 claws.

    2. Disengage the 2 guides to remove the separate type front seatback spring assembly.

    3. Remove the 2 front seatback hooks from the separate type front seatback spring assembly.

  34. REMOVE SEPARATE TYPE FRONT SEAT CUSHION SPRING ASSEMBLY


    1. A01HUAD

      Remove the separate type front seat cushion spring assembly.