FRONT PASSENGER AIRBAG ASSEMBLY INSTALLATION


  1. INSTALL NO. 2 INSTRUMENT PANEL WIRE


    1. A01HTNHE02
      Text in Illustration
      *1 Airbag Connector
      *2 Airbag Connector Lock

      Connect the 2 airbag connectors of the No. 2 instrument panel wire to the instrument panel passenger airbag assembly.

      Note


      • When connecting any airbag connector, take care not to damage the airbag wire harness.

      • Be sure to only connect the connectors to each corresponding color.

    2. Push in the 2 locks to install the 2 airbag connectors to the instrument panel passenger airbag assembly.

    3. Engage the clamp.

  2. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY

    Note

    If the hooks are not engaged in the correct order, the deployment part of the instrument panel passenger airbag assembly may be damaged.


    1. A01HV7V

      Engage the 3 hooks as shown in the illustration.

    2. Push the instrument panel passenger airbag assembly to engage the 3 hooks.

    3. Install the 2 screws to install the instrument panel passenger airbag assembly.

  3. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY


    1. Engage the 5 guides and temporarily install the instrument panel safety pad assembly as shown in the illustration.

      A01HU8O

      Note


      • Do not damage the instrument panel safety pad assembly.

      • Do not allow the wire harnesses to interfere with the surrounding parts.

    2. Install the 2 clips.

    3. Install the 3 bolts <C> and nut <G> or <H>.

    4. Install the 2 passenger airbag bolts <A> or <B>.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

    5. Engage each clamp.

    6. Connect each connector.

  4. CONNECT NO. 2 INSTRUMENT PANEL WIRE


    1. Check that the power switch is off.

    2. Check that the cable is disconnected from the negative (-) auxiliary battery terminal.

      CAUTION:

      Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

    3. A01HUYF

      Connect the connector.

      Note

      When connecting any airbag connector, take care not to damage the airbag wire harness.

  5. INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

    Click here

  6. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here