OCCUPANT CLASSIFICATION SYSTEM PRECAUTION


  1. PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following system(s) after the cable is reconnected:

    System See Procedure
    Parking Assist Monitor System

    Click here

  2. GENERAL PRECAUTION

    Perform zero point calibration and sensitivity check if any of the following conditions occur:


    • The occupant detection ECU is replaced.

    • Accessories (seatback tray and seat cover, etc.) are installed.

    • The front passenger seat is removed from the vehicle.

    • One of the bolts that is used to install the front passenger seat is removed and reinstalled.

    • The vehicle is brought to the workshop for repair due to an accident or a collision.