SECURITY HORN ASSEMBLY REMOVAL


  1. REMOVE SPARE WHEEL COVER ASSEMBLY


    1. Remove the spare wheel cover assembly.

  2. REMOVE BAGGAGE HOLDER NET (w/ Partition Net)


    1. A01HUSM

      Remove the 5 clips.

    2. A01HU2Q

      Disengage the 4 clips and remove the rear floor finish plate.

  3. REMOVE LUGGAGE COMPARTMENT FRONT TRIM COVER


    1. A01HSCM

      Disengage the 8 fasteners.

    2. Disengage the 3 claws and remove the luggage compartment front trim cover.

  4. REMOVE REAR FLOOR FINISH PLATE


    1. A01HUSM

      Remove the 5 clips.

    2. A01HU2Q

      Disengage the 4 clips and remove the rear floor finish plate.

  5. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  6. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER RH


    1. A01HUJME01
      Text in Illustration
      *1 Clip <A>
      *2 Clip <B>

      Remove the clip <A>.

    2. Remove the 2 clips <B>.

    3. Disengage the fastener and remove the luggage compartment inner trim cover RH.

  7. REMOVE SECURITY HORN ASSEMBLY


    1. A01HTJ5

      Remove the 2 nuts.

    2. Disconnect the connector and remove the security horn assembly.