DATA LIST
Tech Tips
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the Techstream to the DLC3.
Turn the power switch on (IG).
Turn the Techstream on.
Enter the following menus: Body Electrical / Main Body / Data List.
According to the display on the Techstream, read the Data List.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| ACC SW | Power switch/ON or OFF | ON: Power switch on (ACC) OFF: Power switch off |
- |
| IG SW | Power switch/ON or OFF | ON: Power switch on (IG) OFF: Power switch off or on (ACC) |
- |
| RR Door Courtesy SW | Rear door courtesy light switch RH/ON or OFF | ON: Rear door RH open OFF: Rear door RH closed |
- |
| RL Door Courtesy SW | Rear door courtesy light switch LH/ON or OFF | ON: Rear door LH open OFF: Rear door LH closed |
- |
| FR Door Lock Pos | Front door RH unlock detection switch/LOCK or UNLOCK | LOCK: Front door RH locked UNLOCK: Front door RH unlocked |
- |
| FR Door Courtesy | Front door courtesy light switch RH/ON or OFF | ON: Front door RH closed OFF: Front door RH open |
- |
| FL Door Lock Pos | Front door LH unlock detection switch/LOCK or UNLOCK | LOCK: Front door LH locked UNLOCK: Front door LH unlocked |
- |
| FL Door Courtesy | Front door courtesy light switch LH/ON or OFF | ON: Front door LH closed OFF: Front door LH open |
- |
| Hood Courtesy SW | Engine hood courtesy switch/ON or OFF | ON: Engine hood closed OFF: Engine hood open |
- |
| RR-Door Lock Pos SW | Rear door RH unlock detection switch/ON or OFF | ON: Rear door RH unlocked OFF: Rear door RH locked |
- |
| RL-Door Lock Pos SW | Rear door LH unlock detection switch/ON or OFF | ON: Rear door LH unlocked OFF: Rear door LH locked |
- |
| Luggage Courtesy SW | Luggage compartment door courtesy switch/ON or OFF | ON: Luggage compartment door open OFF: Luggage compartment door closed |
- |
| Glass Break Sensor Detection* | Glass breakage sensor detection/ON or OFF | ON: Glass breakage sensor detection OFF: Glass breakage sensor not detected |
- |
*: w/ Glass Breakage Sensor
ACTIVE TEST
Tech Tips
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. The Data List information can be displayed while performing Active Tests.
Connect the Techstream to the DLC3.
Turn the power switch on (IG).
Turn the Techstream on.
Enter the following menus: Body Electrical / Main Body or Smart Key / Active Test.
According to the display on the Techstream, perform the Active Test.
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Illuminated Entry System*1 | Interior lights | OFF/ON |
|
| Taillight Relay*1 | Taillights | OFF/ON | - |
| Headlight Relay*1 | Headlights | OFF/ON | - |
| Vehicle Horn | Vehicle horns | OFF/ON | - |
| Security Horn | Security horn | OFF/ON | - |
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Immobiliser Indicator | Security indicator light | OFF/ON | - |
*1: w/ Daytime Running Light Control
*2: w/o Sliding Roof
*3: w/ Sliding Roof