DOOR CONTROL SWITCH INSPECTION


  1. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY


    1. A01HVRAE09
      Text in Illustration
      *a

      Component without harness connected

      (Power Window Regulator Master Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 (L) - 1 (E) Lock switch pushed Below 1 Ω
      2 (L) - 1 (E) off 10 kΩ or higher
      9 (UL) - 1 (E) Unlock switch pushed Below 1 Ω
      9 (UL) - 1 (E) off 10 kΩ or higher

      If the result is not as specified, replace the power window regulator master switch assembly.

  2. INSPECT DOOR CONTROL SWITCH ASSEMBLY


    1. A01HT1WE01
      Text in Illustration
      *a

      Component without harness connected

      (Door Control Switch Assembly)
      *b Unlock
      *c Lock

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      4 (L) - 3 (E) Locked Below 1 Ω
      4 (L) - 3 (E) off 10 kΩ or higher
      2 (UL) - 3 (E) Unlocked Below 1 Ω
      2 (UL) - 3 (E) off 10 kΩ or higher

      If the result is not as specified, replace the door control switch assembly.