TRANSMITTER BATTERY REPLACEMENT


  1. REMOVE TRANSMITTER BATTERY

    Note

    Take extra care when handling these precision electronic components.


    1. for Type A:


      1. A01HUXS

        Push the release hook knob and extract the mechanical key.

      2. A01HSEUE01
        Text in Illustration
        *1 Protective Tape

        Insert a precision screwdriver into the gap, and turn the screwdriver to detach the transmitter housing cover.

        Tech Tips

        Tape the screwdriver tip before use.

      3. A01HV7SE01
        Text in Illustration
        *1 Protective Tape

        Insert a precision screwdriver into the gap and gently remove the transmitter battery (lithium battery: CR2032).

        Note


        • Do not push the terminals with your finger.

        • Do not forcibly pry up the transmitter battery. The terminals may be damaged.

        • Do not touch the transmitter battery with wet hands. Water may cause rust.

        • Do not touch or move any components inside the transmitter. It may interfere with proper operation.

        • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

        Tech Tips

        Tape the screwdriver tip before use.

    2. for Type B:


      1. A01HUXS

        Push the release hook knob and extract the mechanical key.

      2. A01HSEUE01
        Text in Illustration
        *1 Protective Tape

        Insert a precision screwdriver into the gap, and turn the screwdriver to detach the transmitter housing cover.

        Tech Tips

        Tape the screwdriver tip before use.

      3. A01HTDB

        Disengage the 2 claws and remove the cover.

      4. A01HSFOE01
        Text in Illustration
        *1 Protective Tape

        Insert a precision screwdriver into the gap and gently remove the transmitter battery (lithium battery: CR2032).

        Note


        • Do not push the terminals with your finger.

        • Do not forcibly pry up the transmitter battery. The terminals may be damaged.

        • Do not touch the transmitter battery with wet hands. Water may cause rust.

        • Do not touch or move any components inside the transmitter. It may interfere with proper operation.

        • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

        Tech Tips

        Tape the screwdriver tip before use.

  2. INSTALL TRANSMITTER BATTERY


    1. for Type A:


      1. A01HSM4

        Install a new transmitter battery (lithium battery: CR2032) with the positive (+) side facing upward, as shown in the illustration.

        Note


        • Do not bend the transmitter battery electrode during insertion.

        • Keep the transmitter cover interior free of dust and oil.

        • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      2. A01HT9W

        Install the transmitter housing cover by pressing down on it as shown in the illustration.

      3. A01HV1E

        Insert the mechanical key into the transmitter.

      4. Press one of the transmitter switches and check that the LED illuminates.

        OK
        Transmitter LED illuminates when switch is pressed.

    2. for Type B:


      1. A01HSCY

        Install a new transmitter battery (lithium battery: CR2032) with the positive (+) side facing upward, as shown in the illustration.

        Note


        • Do not bend the transmitter battery electrode during insertion.

        • Keep the transmitter cover interior free of dust and oil.

        • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      2. A01HVKG

        Engage the 2 claws and install the cover.

      3. A01HT9W

        Install the transmitter housing cover by pressing down on it as shown in the illustration.

      4. A01HV1E

        Insert the mechanical key into the transmitter.

      5. Press one of the transmitter switches and check that the LED illuminates.

        OK
        Transmitter LED illuminates when switch is pressed.