INTEGRATION RELAY INSTALLATION


  1. INSTALL ENGINE ROOM JUNCTION BLOCK ASSEMBLY


    1. Connect the 2 connectors.

    2. A01HU35

      Connect the 4 connectors to the engine room relay block assembly.

    3. Engage the 2 claws to install the engine room junction block assembly.

  2. INSTALL NO. 1 RELAY BLOCK COVER


    1. A01HV7W

      Engage the 2 claws to install the No. 1 relay block cover.

  3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here .

  4. INSTALL LUGGAGE TRIM SERVICE HOLE COVER


    1. Engage the claw to connect the luggage trim service hole cover.