BLIND SPOT MONITOR SYSTEM DTC CHECK / CLEAR


  1. CHECK DTC


    1. Connect the Techstream to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the blind spot monitor main switch (warning canceling switch assembly) on.

    4. Turn the Techstream on.

    5. Enter the following menus: Body Electrical / Blind Spot Monitor Master or Blind Spot Monitor Slave / Trouble Codes.

      Tech Tips

      The blind spot monitor sensor RH and the blind spot monitor sensor LH both output DTCs. Therefore, check both blind spot monitor sensors for DTCs.

    6. Check for DTCs Click here.

  2. CLEAR DTC


    1. Connect the Techstream to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the blind spot monitor main switch (warning canceling switch assembly) on.

    4. Turn the Techstream on.

    5. Enter the following menus: Body Electrical / Blind Spot Monitor Master or Blind Spot Monitor Slave / Trouble Codes.

    6. Clear the DTCs.