DESCRIPTION
The No. 1 ultrasonic sensor (rear right sensor) is installed on the rear bumper. The ECU detects obstacles based on signals received from the No. 1 ultrasonic sensor (rear right sensor). If the No. 1 ultrasonic sensor (rear right sensor) has an open circuit or other malfunction, it will not function normally.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1AE9 | A malfunction of the No. 1 ultrasonic sensor (rear right sensor). |
|
INSPECTION PROCEDURE
Note
If DTCs are output after repairs, turn the power switch on (IG) and turn the clearance sonar main switch on. Then clear the DTCs Click here.
PROCEDURE
CHECK DTC OUTPUT
Check for DTCs Click here.
| Result | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| B |
|
GO TO DTC (C1AED) Click here |
| C |
|
USE SIMULATION METHOD TO CHECK Click here |
| A |
|
REPLACE NO. 1 ULTRASONIC SENSOR (REAR RIGHT SENSOR)
Replace the No. 1 ultrasonic sensor (rear right sensor) with a known good one Click here.
Tech Tips
All of the sensors are interchangeable. To confirm whether a sensor is functioning normally, switch it with a known good sensor from the other end of the vehicle.
| NEXT |
|
CHECK DTC OUTPUT
Clear the DTCs Click here.
Check for DTCs Click here.
| Result | ||||||
|---|---|---|---|---|---|---|
|
| NG |
|
REPLACE CLEARANCE WARNING ECU ASSEMBLY Click here |
| OK |
|
END (REAR RIGHT SENSOR WAS DEFECTIVE)