FRONT DOOR SPEAKER INSTALLATION


  1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY


    1. Engage the 2 claws to the vehicle body to temporarily install the front No. 1 speaker assembly.

    2. A01HU5CE01
      *A LH Side
      *B RH Side

      Install the front No. 1 speaker assembly with the 4 screws.

      Note

      Do not touch the speaker cone.

      Tech Tips

      Install the screws in the order shown in the illustration.

    3. Connect the connector.

  2. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP


    1. A01HTA1

      Install the front door inner glass weatherstrip.

  3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY


    1. A01HUFNE01
      Text in Illustration
      *1 Front Door Inside Locking Cable Assembly
      *2 Front Door Lock Remote Control Cable Assembly

      Connect the front door lock remote control cable assembly and front door inside locking cable assembly.

    2. A01HTPYE01
      Text in Illustration
      *1 Reference Boss

      Engage the front door trim board sub-assembly with the 4 claws and reference boss as shown in the illustration.

    3. A01HVLJ

      Engage the 10 clips and install to front door trim board sub-assembly.

    4. Install the 3 screws.

    5. If protective tape has been applied, remove it.

  4. INSTALL COURTESY LIGHT ASSEMBLY


    1. Connect the connector.

    2. A01HVPHE01
      Text in Illustration
      *A for LH Side
      *B for RH Side

      Engage the claw to install the courtesy light assembly.

  5. INSTALL FRONT ARMREST ASSEMBLY


    1. A01HTZY

      Engage the 2 guides, 3 clips and 7 claws, and install the front armrest assembly.

  6. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)


    1. Connect each connector.

    2. A01HU4N

      Engage the 4 guides, 2 clips and 5 claws, and install the power window regulator master switch assembly with front door armrest base panel.

  7. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)


    1. Connect each connector.

    2. A01HU54

      Engage the 4 guides, 2 clips and 5 claws, and install the power window regulator switch assembly with front door armrest base panel.

  8. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH


    1. A01HT5B

      Engage the 3 clips to install the front door lower frame bracket garnish.

  9. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG


    1. A01HVYI

      Engage the 3 claws to install the front door inside handle bezel plug.