FRONT DOOR SPEAKER REMOVAL


  1. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG


    1. A01HT07

      Using a moulding remover, disengage the 3 claws and remove the front door inside handle bezel plug as shown in the illustration.

  2. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH


    1. A01HT5B

      Disengage the 3 clips and remove the front door lower frame bracket garnish.

  3. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)


    1. A01HW1C

      Using a moulding remover, disengage the 2 clips, 5 claws and 4 guides as shown in the illustration.

    2. Disconnect each connector and remove the power window regulator master switch assembly with front door armrest base panel.

  4. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)


    1. A01HVRO

      Using a moulding remover, disengage the 2 clips, 5 claws and 4 guides as shown in the illustration.

    2. Disconnect each connector and remove the power window regulator switch assembly with front door armrest base panel.

  5. REMOVE FRONT ARMREST ASSEMBLY


    1. A01HSTH

      Using a moulding remover, disengage the 3 clips, 7 claws and 2 guides and remove the front armrest assembly.

  6. REMOVE COURTESY LIGHT ASSEMBLY


    1. A01HV6FE01
      Text in Illustration
      *A for LH Side
      *B for RH Side
      *1 Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw.

    2. Disconnect the connector and remove the courtesy light assembly.

  7. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY


    1. A01HVVFE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the front door panel.

    2. A01HVLJ

      Remove the 3 screws.

    3. Using a clip remover, disengage the 10 clips.

    4. A01HVDSE01
      Text in Illustration
      *1 Reference Boss
      *2 Front Door Inner Glass Weatherstrip

      Pull out the front door trim board sub-assembly in the direction indicated by the arrow as shown in the illustration.

    5. Disengage the reference boss from the front door panel.

    6. Raise the front door trim board sub-assembly to remove the front door trim board sub-assembly together with the front door inner glass weatherstrip.

    7. A01HVYG

      Disconnect the front door lock remote control cable assembly and front door inside locking cable assembly.

  8. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP


    1. A01HTJEE01
      Text in Illustration
      *1 Screwdriver

      Using a screwdriver, disengage the 4 claws and remove the front door inner glass weatherstrip from the front door trim board sub-assembly as shown in the illustration.

  9. REMOVE FRONT NO. 1 SPEAKER ASSEMBLY


    1. A01HV1Q

      Disconnect the connector.

    2. Remove the 4 screws.

    3. A01HU22

      Disengage the 2 claws and remove the front No. 1 speaker assembly.

      Note

      Do not touch the speaker cone.