INSPECTION PROCEDURE
PROCEDURE
CHECK DISC
Check that the disc is not deformed or cracked.
| OK |
|---|
| No deformation or cracks on the disc |
| NG |
|
DISC IS FAULTY |
| OK |
|
CHECK DISC
Check the disc.
| OK |
|---|
| The disc is clean. |
Note
Do not use a conventional record cleaner or anti-static preservative.
Tech Tips
If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
| NG |
|
CLEAN DISC |
| OK |
|
REPLACE DISC AND RECHECK
Replace the disc with a known good one and check that the malfunction disappears.
| OK |
|---|
| Malfunction disappears. |
| NG |
|
CHECK NAVIGATION ECU SUB-ASSEMBLY Click here |
| OK |
|
END
CHECK NAVIGATION ECU SUB-ASSEMBLY
Check that the navigation ECU sub-assembly installation condition.
Check that the navigation ECU sub-assembly is properly installed.
| OK |
|---|
| Navigation ECU sub-assembly is properly installed. |
| NG |
|
REINSTALL NAVIGATION ECU SUB-ASSEMBLY |
| OK |
|
REPLACE NAVIGATION ECU SUB-ASSEMBLY Click here