STEERING PAD SWITCH REMOVAL


  1. REMOVE HORN BUTTON ASSEMBLY

    Click here

  2. REMOVE STEERING PAD SWITCH ASSEMBLY


    1. Disconnect the steering pad switch connector from the spiral cable sub-assembly.

    2. A01HVNU

      Remove the 2 screws.

    3. Disengage the claw and 2 pins to remove the steering pad switch assembly (RH side) from the steering wheel sub-assembly.

    4. A01HT3U

      Remove the 2 screws.

    5. Disengage the claw and 2 pins to remove the steering pad switch assembly (LH side) from the steering wheel sub-assembly.