STEERING WHEEL REMOVAL

Note


  • Do not replace the spiral cable with sensor sub-assembly with the auxiliary battery connected and the power switch on (IG).

  • Do not rotate the spiral cable with sensor sub-assembly without the steering wheel with the auxiliary battery connected and the power switch on (IG).

  • Ensure that the steering wheel is installed and aligned straight when inspecting the steering sensor.


  1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

  2. REMOVE HORN BUTTON ASSEMBLY

    Click here

  3. REMOVE STEERING WHEEL ASSEMBLY


    1. A01HT2HE01
      Text in Illustration
      *a Matchmark

      Remove the steering wheel assembly set nut.

    2. Put matchmarks on the steering wheel assembly and steering main shaft.

    3. Disconnect the connectors from the spiral cable sub-assembly.

    4. A01HVJUE01
      Text in Illustration
      *a Turn
      *b Hold

      Using SST, remove the steering wheel assembly.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09954-05070 )

      Note

      Apply a small amount of grease to the threads and tip of SST (09953-05020) before use.

  4. REMOVE STEERING PAD SWITCH ASSEMBLY


    1. Disconnect the steering pad switch connector from the spiral cable sub-assembly.

    2. A01HVNU

      Remove the 2 screws.

    3. Disengage the claw and 2 pins to remove the steering pad switch assembly (RH side) from the steering wheel sub-assembly.

    4. A01HT3U

      Remove the 2 screws.

    5. Disengage the claw and 2 pins to remove the steering pad switch assembly (LH side) from the steering wheel sub-assembly.

  5. REMOVE CRUISE CONTROL MAIN SWITCH


    1. A01HSJ3

      Remove the 2 screws.

    2. A01HSOK

      Disconnect the connector and remove the cruise control main switch.

  6. REMOVE CRUISE CONTROL SWITCH WIRE


    1. Remove the cruise control switch wire.

  7. REMOVE STEERING SHAKE DAMPER


    1. A01HTP9

      Remove the 2 screws and steering shake damper from the steering wheel sub-assembly.