FRONT BRAKE DISASSEMBLY


  1. REMOVE FRONT DISC BRAKE PISTON


    1. Place a piece of cloth between the front disc brake piston and front disc brake cylinder assembly.

    2. A01HUBX

      Apply compressed air to remove the front disc brake piston from the front disc brake cylinder assembly.

      CAUTION:

      Do not place your fingers in front of the front disc brake piston when using compressed air.

      Note

      Do not allow any brake fluid to spatter.

  2. REMOVE CYLINDER BOOT


    1. A01HUFPE01
      Text in Illustration
      *1 Vinyl Tape

      Using a screwdriver with its tip wrapped with vinyl tape, remove the cylinder boot from the front disc brake cylinder.

      Note

      Be careful not to damage the front disc brake cylinder.

  3. REMOVE PISTON SEAL


    1. A01HW0KE02
      Text in Illustration
      *1 Vinyl Tape

      Using a screwdriver with its tip wrapped with vinyl tape, remove the piston seal from the front disc brake cylinder.

      Note

      Do not damage the inner surface or piston seal groove of the front disc brake cylinder.

  4. REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

  5. REMOVE FRONT DISC BRAKE BLEEDER PLUG