REAR STRUT ROD REMOVAL

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.


  1. REMOVE REAR WHEEL

  2. SEPARATE NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. A01HT2W

      Remove the bolt and separate the No. 3 parking brake cable assembly from the vehicle.

  3. REMOVE REAR STRUT ROD ASSEMBLY


    1. A01HSQBE01
      Text in Illustration
      *1 Jack
      *2 Wooden Block

      Support the rear axle carrier sub assembly with a jack using a wooden block.

    2. A01HVEU

      Remove the 2 bolts and separate the rear strut rod assembly (front side).

    3. A01HVVT

      Remove the bolt, nut and rear strut rod assembly from the rear axle carrier sub-assembly.

      Note

      When removing the bolt, keep the nut from rotating.