SHIFT LEVER POSITION SENSOR ADJUSTMENT


  1. INSPECT SHIFT LEVER POSITION SENSOR POSITION


    1. Apply the parking brake.

    2. Lock the wheels with chocks to secure the vehicle.

    3. Turn the power switch on (READY).

    4. Move the shift lever to D and release the brake.

      Note

      Be sure to apply the parking brake and lock the wheels with chocks to secure the vehicle.

    5. A01HTMUE01
      Text in Illustration
      *a Gear Activation Point
      *b N Position
      *c R Position
      *d D Position

      Slowly move the shift lever to N and measure moving distance (A) of the shift lever from the original point to the gear activation point.

      Note

      Be sure to move the shift lever slowly.

    6. Move the shift lever to R and release the brake.

      Note

      Be sure to apply the parking brake and lock the wheels with chocks to secure the vehicle.

    7. Slowly move the shift lever to N and measure moving distance (B) of the shift lever from the original point to the vehicle activation point.

      Note

      Be sure to move the shift lever slowly.

    8. Check that moving distances (A) and (B) shown in the illustration are almost the same.

      Tech Tips


      • If moving distances (A) and (B) are almost the same, adjustment of the shift lever position is not necessary.

      • If moving distance (A) is shorter than (B), perform adjustment of the shift lever position [*1].

      • If moving distance (B) is shorter than (A), perform adjustment of the shift lever position [*2].

  2. ADJUST SHIFT LEVER POSITION SENSOR POSITION


    1. If moving distance (A) is shorter than (B).[*1]


      1. Move the shift lever to N.

      2. A01HU0D

        Loosen the 2 bolts.

      3. A01HVPY

        Slightly turn the shift lever position sensor counterclockwise.

        Tech Tips

        If the shift lever is moved from R to N, the moving distance of the shift lever from the original point to the gear activation point becomes longer.

      4. A01HU0DE01

        Tighten the 2 bolts in the order shown in the illustration.

        Torque:
        13 N*m  { 133 kgf*cm, 10 ft.*lbf }

      5. Recheck the shift lever position sensor.

    2. If moving distance (B) is shorter than (A) [*2]


      1. Move the shift lever to N.

      2. A01HU0D

        Loosen the 2 bolts.

      3. A01HST9

        Slightly turn the shift lever position sensor clockwise.

        Tech Tips

        If the shift lever is moved from D to N, the moving distance of the shift lever from the original point to the gear activation point becomes longer.

      4. A01HU0DE01

        Tighten the 2 bolts in the order shown in the illustration.

        Torque:
        13 N*m  { 133 kgf*cm, 10 ft.*lbf }

      5. Recheck the shift lever position sensor.