EXHAUST MANIFOLD REMOVAL


  1. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

  2. REMOVE ENGINE UNDER COVER RH

  3. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

  4. REMOVE ENGINE UNDER COVER LH

  5. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. A01HW8B

      Disconnect the heated oxygen sensor connector.

    2. A01HU5X

      Remove the 2 bolts, 2 compression springs and 2 nuts.

    3. Remove the front exhaust pipe assembly from the exhaust pipe support.

    4. Remove the 2 gaskets from the exhaust manifold converter sub-assembly and front exhaust pipe assembly.

  6. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR


    1. A01HUUX

      Remove the 4 bolts and No. 1 exhaust manifold heat insulator.

  7. REMOVE AIR FUEL RATIO SENSOR


    1. A01HV66

      Remove the hose clamp.

    2. Disconnect the air fuel ratio sensor connector.

    3. A01HSUAE01

      Using SST, remove the air fuel ratio sensor from the exhaust manifold.

      SST
      09224-00010

  8. REMOVE NO. 1 MANIFOLD CONVERTER INSULATOR


    1. A01HSDU

      Remove the 3 bolts and No. 1 manifold converter insulator.

  9. REMOVE NO. 2 EGR PIPE


    1. A01HSB8

      Remove the 2 bolts, 2 nuts and No. 2 EGR pipe.

    2. Remove the 2 gaskets.

  10. REMOVE NO. 2 MANIFOLD STAY


    1. A01HTM5

      Remove the bolt, nut and No. 2 manifold stay.

  11. REMOVE MANIFOLD STAY


    1. A01HW2Z

      Remove the bolt, nut and manifold stay.

  12. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY


    1. A01HU5U

      Remove the 5 nuts and exhaust manifold converter sub-assembly.

    2. A01HVVH

      Remove the gasket.

  13. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR


    1. A01HVKY

      Remove the 2 bolts and No. 2 exhaust manifold heat insulator.