PURGE VALVE REMOVAL


  1. REMOVE PURGE VSV


    1. A01HSYE

      Disconnect the connector and wire harness clamp.

    2. A01HVCDE01
      Text in Illustration
      *1 Retainer
      *2 Fuel Tube Connector
      *3 Pipe
      *4 O-ring
      *a Pinch
      *b Pull

      Disconnect the 2 fuel vapor feed hoses.

      Note


      • Remove any dirt or foreign matter on the fuel tube connector before performing this work.

      • Do not allow any scratches or foreign matter to get on the parts when disconnecting them as the fuel tube connector has an O-ring that seals the pipe.

      • Perform this work by hand. Do not use any tools.

      • Protect the disconnected parts by covering them with plastic bags after disconnecting each fuel vapor feed hose.

    3. Remove the purge VSV from the No. 1 air cleaner hose.

    4. A01HSWN

      Remove the fuel vapor feed hose from the purge VSV.