KNOCK SENSOR INSTALLATION


  1. INSTALL KNOCK CONTROL SENSOR


    1. A01HUDXE04
      Text in Illustration
      *a Front of Engine
      *b Up
      *c 7°
      *d 10°

      Install the sensor with the bolt so that the sensor is angled as shown in the illustration.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Note

      The acceptable installation angle of the sensor is between 7° upward and 10° downward from the horizontal position.

      Tech Tips

      Perform "Inspection After Repair" after replacing the knock control sensor Click here

    2. Connect the sensor connector.

  2. INSTALL INTAKE MANIFOLD

    Click here