IGNITION COIL AND SPARK PLUG REMOVAL


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. A01HUP3

      Lift the rear of the engine cover to detach the cover from the 2 pins, and then lift the front of the engine cover to detach the cover from the pin and remove the No. 1 engine cover sub-assembly.

      Note

      Attempting to disengage both front and rear clips at the same time may cause the No. 1 engine cover sub-assembly to break.

  2. REMOVE IGNITION COIL ASSEMBLY


    1. A01HUHF

      Disconnect the 4 ignition coil assembly connectors.

    2. A01HULK

      Remove the 4 bolts and 4 ignition coil assemblies.

  3. REMOVE SPARK PLUG


    1. A01HSV8

      Using a spark plug wrench, remove the 4 spark plugs.