P314 HYBRID TRANSMISSION / TRANSAXLE SERVICE DATA

Transaxle fluid pressure Engine Speed: 900 rpm

9.8 kPa (0.1 kgf/cm2, 1.4 psi) or more

Hybrid vehicle transaxle assembly type T oil seal LH side -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)
RH side -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)
Input shaft type T oil seal 1.0 to 1.8 mm (0.0394 to 0.0709 in.)
Lower shift lever assembly
Tester Connection Condition Specified Condition
5 (IG) - Body ground Power switch on (IG) 11 to 14 V
Power switch off Below 1 V
4 (STP) - Body ground Brake pedal depressed 11 to 14 V
Brake pedal released Below 1 V
1 (E) - Body ground Always Below 1 V
Tester Connection Shift Lever Position Specified Condition
4 (P) - 3 (E2) P 10 kΩ or higher
Other than P Below 1 V
Tester Connection Condition Specified Condition
1 (SLS+) - 2 (SLS-) Always 112 Ω
Shift lever position sensor
Tester Connection Shift Lever Position Specified Condition
8 (+B) - 1 (D) D Below 1 Ω
Except D 10 kΩ or higher
8 (+B) - 2 (N) N Below 1 Ω
Except N 4.2 to 5.2 kΩ
8 (+B) - 3 (P) P Below 1 Ω
Except P 10 kΩ or higher
8 (+B) - 4 (R) R Below 1 Ω
Except R 10 kΩ or higher
8 (+B) - 5 (MJ) ALL Below 1 Ω
8 (+B) - 6 (FD) D or B Below 1 Ω
Except D and B 10 kΩ or higher
8 (+B) - 7 (B) B Below 1 Ω
Except B 10 kΩ or higher
8 (+B) - 9 (RV) R Below 1 Ω
Except R 10 kΩ or higher