COMBINATION SWITCH INSTALLATION


  1. INSTALL EV DRIVE MODE SWITCH (PATTERN SELECT SWITCH ASSEMBLY)


    1. Engage the 2 claws to install the EV drive mode switch (pattern select switch assembly).

  2. INSTALL REAR CONSOLE UPPER PANEL SUB-ASSEMBLY


    1. Connect each connector.

    2. Engage the 4 clips and install the rear console upper panel sub-assembly.

    3. Move the shift lever to P.

  3. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01HTIF

      Turn the shift lever knob sub-assembly clockwise to install the shift lever knob sub-assembly.

  4. INSTALL FRONT PANEL GARNISH LH


    1. Engage the 3 claws, 2 clips and 8 guides to install the front panel garnish LH.

  5. INSTALL FRONT PANEL GARNISH RH


    1. Engage the 3 claws, 2 clips and 8 guides to install the front panel garnish RH.