ROCKER PANEL MOULDING REMOVAL


  1. REMOVE FRONT FENDER OUTSIDE MOULDING


    1. A01EJ2F

      Remove the screw.

    2. Disengage the 2 clips and remove the front fender outside moulding.

    3. Remove the 2 clips (No. 1 outside moulding clip) from the front fender outside moulding.

  2. REMOVE NO. 2 ROCKER PANEL MOULDING PROTECTOR


    1. A01EKNPE01

      Remove the screw <A>.

    2. Remove the 2 screws <B> and remove the No. 2 rocker panel moulding protector.

  3. REMOVE REAR ROCKER PANEL MOULDING END COVER


    1. A01EK3X

      Remove the 2 screws.

    2. Using a clip remover, remove the clip and rear rocker panel moulding end cover.

    3. Remove the 2 grommets from the rear rocker panel moulding end cover.

  4. REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY


    1. A01EK7PE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the body rocker panel moulding assembly.

    2. A01EKLG

      Remove the screw.

    3. A01EKGI

      Remove the grommet.

    4. A01EMT4

      Remove the 7 clips.

    5. A01EJOW

      Disengage the 7 clips to remove the body rocker panel moulding assembly.

    6. Remove the 7 clips (rocker panel moulding clip).