REAR BUMPER REASSEMBLY


  1. INSTALL NO. 1 REAR BUMPER REINFORCEMENT


    1. A01ELL7

      Install the No. 1 rear bumper reinforcement with the 6 nuts.

      Torque:
      68 N*m  { 693 kgf*cm, 50 ft.*lbf }

    2. Engage each clamp to connect the wire harness.

  2. INSTALL REAR BUMPER ENERGY ABSORBER


    1. A01EK6A

      Engage the 2 guides to install the rear bumper energy absorber.

  3. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT LH


    1. A01ELR4

      Engage the 2 claws and install the No. 2 rear bumper side support LH.

    2. Install the screw.

  4. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  5. INSTALL REAR BUMPER SIDE RETAINER LH


    1. A01EJZY

      Engage the 2 claws and install the rear bumper side retainer LH.

    2. Install the screw.

  6. INSTALL REAR BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  7. INSTALL REFLEX REFLECTOR ASSEMBLY LH


    1. Engage the guide.

    2. Install the reflex reflector assembly with the bolt.

  8. INSTALL REFLEX REFLECTOR ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and LH side.