REAR BUMPER REMOVAL


  1. REMOVE REAR BUMPER PLATE LH


    1. A01ELEQE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with the tip wrapped with protective tape, disengage the 2 claws and remove the rear bumper plate LH.

  2. REMOVE REAR BUMPER PLATE RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  3. REMOVE REAR BUMPER ASSEMBLY


    1. A01EK4QE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the rear bumper assembly.

    2. A01EKSD

      Remove the 2 bolts and 2 screws.

    3. Using a clip remover, remove the 2 clips.

    4. A01ELE7

      Remove the 2 screws and 2 clips.

    5. A01EKM0

      Remove the screw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. A01ELGX

      Disengage the 5 claws.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    7. A01ELBQ

      Disengage the 6 claws as shown in the illustration.

    8. Disconnect each connector.

    9. Remove the rear bumper assembly as shown in the illustration.